YOKOGAWA UT Advanced UT32A, Руководство пользователя

Страница: 79 / 340

6-20
IM 05P01D31-01EN
6.5 Setting Alarm Setpoint
Setting Display
Parameter Setting Display Operation Display > PARAMETER or PARA key for 3
seconds (to [ MODE ] Menu Display) > Right arrow key (to
[ SP ] Menu Display) > SET/ENTER key (The setting parameter
is displayed.) > Down arrow key (The setting parameter is
displayed.)
In the setting Display for the alarm parameters, Displays can
be arbitrarily switched using the Up, Down, Left or Right arrow
key. Pressing the Left or Right arrow key changes the group.
(The group number is displayed on Group display.)
Setting Details
Parameter
symbol
Name
Display
level
Setting range Menu symbol
A1 to A4
Alarm-1 to -4
setpoint
EASY
Set a display value of setpoint of
PV alarm, SP alarm, deviation
alarm, output alarm, or velocity
alarm.
-19999 to 30000 (Set a value
within the input range.)
Decimal point position depends on
the input type
SP
ALNO. Number of alarms PRO 1 to 4 CTL
Note:1 When the alarm setpoint parameter is displayed, the group number is shown on Group
display.
Note2: The initial value of the parameter ALNO. is “4.” Four alarm setpoint parameters are displayed
for each SP group.
Description
Each alarm type has four alarm setpoints.
Specifying the SP number (SPNO) determines the alarm setpoint to be used.
Alarm-related parameter Number of settings
Alarm type 4 (number of settings)
PV velocity alarm time setpoint 4 (number of settings)
Alarm hysteresis 4 (number of settings)
Alarm delay timer 4 (number of settings)
Alarm setpoint 4 (number of settings) x 4 (number of groups)
► Alarm type: Chapter 11 Alarm Functions