
74
74
IM 54051-E
This section explains the procedure to directly output the data from the main unit
to the printer (Model name: 970 10, optional).
2.1 Output preparation
Before starting output to the printer, confirm that the printer is connected to the main unit
and the setup conditions of the printer.
■
Printer-main unit connection
A dedicated cable must be purchased (Model name: 910 10, round DIN 8-pin to D-sub 9-pin
straight cable) to connect the printer and this instrument.
Follow the procedure below to connect the printer and main unit.
1.
Turn off the power to the printer.
The power lamp will be turned off.
2.
Refer to the following figure to connect the printer to the main unit.
ESC
FUNC
SET
POWER
CH
LOGGING
MEMORY
CLEAR
ABC
DEF
JKL
GHI
MNO
WXYZ
YUV
Symbol
PQRS
D
Bottom of the main unit
Main unit
Printer
Power switch
On-line switch
Round DIN 8-pin to D-sub 9-pin straight cable (optional)
Printer serial port (9-pin)
- End of procedure
2
Outputting Directly from the Main Unit to the Printer
2 Outputting Directly from the Main Unit to the Printer