
26
IM 54051-E
26
26
4 Setting Up with the Personal Computer
■
Confirming the communication
environment (on the main unit)
Confirm the settings related to communica-
tion environment on the main unit. Con-
firm that the settings are exactly as shown
in the following table.
If any of the settings are different, set them
to the values given below.
Setup item
Setting value (Factory Settings)
Baud rate
9600
Parity
None
Data Length
8bit
Stop bits
2bit
Flow control
None
Home screen
18:54:27
222
222
25.9
°
C
1.
Press the [FUNC], [5], and [1] keys, in
this order.
A screen for setting the communication environment
will appear on the LCD.
F51
Comm Set
2.
Press the [SET] key.
A screen for setting the baud rate will appear on the
LCD. The displayed baud rate is 9600 bps, which is
factory setting.
Baudrate
9600
3.
Press the [SET] key.
A screen for setting the parity will appear on the LCD.
The displayed parity is None, which is factory setting.
Parity
None
4.
Press the [SET] key.
A screen for setting the data length will appear on the
LCD. Confirm that the displayed data length is as
shown in the following figure.
Data Len
8 b i t
5.
Press the [SET] key.
A screen for setting the number of stop bits will ap-
pear on the LCD. The displayed number of stop bits
is 2 bits, which is factory setting.
Stop Bit
2 b i t
6.
Press the [SET] key.
A screen for setting the flow control method will ap-
pear on the LCD. The displayed flow control method
is None, which is factory setting.
Flow
None
7.
Press the [SET] key.
Returns to the communication environment setup screen.
F51
Comm Set
Press the [ESC] key repeatedly to return to the Home
screen.
-End of procedure-