4 Setting Up with the Personal Computer
37
37
IM 54051-E
Preparation for
Measurement
7.
Double-click in the “Hi Alarm” column.
The pull-down menu will appear.
8.
Select either ON or OFF.
9.
Click in the “Lo Temperature” column.
The upper-limit alarm ON/OFF setting is made and the cursor moves to the “Lo Temperature” column.
10.
Enter the “Lo Temperature” with numeric characters (-999.9 to +999.9; Example: +021.0).
[TIP]
Enter a value that does not fall below the “Lo Temperature” of the probe used for the actual measure-
ment. The “Lo Temperature” that can be measured varies according to the probe used for the measure-
ment.
The specified lower-limit temperature has been set.
11.
Double-click in the “Lo Alarm” column.
The pull-down menu will appear.