
60
IM 54051-E
60
60
3
Measuring Temperatures with the Logging Function
If a log has measured data remaining in it, it is not possible to record new mea-
surement data additionally on the same log. To record new data in the log, it must
be cleared beforehand.
[TIP]
The [0] key is also used for switching the unit
of temperature display. If, for example, this
[0] key is pressed in the Home screen, the unit
is switched to “
°
F”. Another pressing of the
same key will restore the unit to “
°
C”.
See Also
For information about clearing the measured
data in a log, refer to “5.7 Clearing the mea-
surement data associated with the log” in the
“Preparation for Measurement” part.
Home screen
18:54:27
25.9
°
C
1.
Press the [LOGGING] key when the
LOG
mark is not displayed in the upper left
corner of the screen.
The
LOG
mark is turned on and the logging mode
is entered.
18:54:42
25.9
°
C
2.
If the “A” or “D” input channel is to be
used, connect the probe to the appro-
priate jack.
Note
Only connect a probe to input channel
“A” if the Home screen is on. If the
probe is connected to the channel after
a tag has been selected, this instrument
may start having data logged into it the
moment the connection is made.
See Also
For information about connecting an input
channel and a probe, refer to “1 Input Channel
and Probe”.
3.
Press the [
▼
] key repeatedly until the
log to be selected is displayed on the
screen.
The log name currently set will be displayed.
Carry
24
°
C
4.
Press the [MEMORY] key.
The interval at which the temperature measurement
is performed will be displayed.
I n t e r v a l
0 0 : 0 0 : 1 0
3 Measuring Temperatures with the Logging Function