
22
22
4 Setting Up with the Personal Computer
IM 54051-E
4
Setting Up with the Personal Computer
4.1
Setting up the “Thermo-Collector” software
The setup operation required for the main unit can be performed on a personal computer.
The “Thermo-Collector” software must be used to do this. This section explains the proce-
dure used to set up the “Thermo-Collector” software on the personal computer.
Connecting the personal computer and the main unit
↓
Installing the “Thermo-Collector” software on the personal computer
↓
Confirming the communication environment (on the personal computer)
↓
Confirming the communication environment (on the main unit)
■
Connecting the personal computer and the main unit
Purchase an RS-232C cable (Model name: 910 09, round DIN 8-pin to D-sub 25-pin type).
Follow the procedure below to connect the main unit to the personal computer.
1.
Turn off the power to both the personal computer and main unit.
2.
Connect the personal computer and the main unit as shown in the following diagram.
ESC
FUNC
SET
POWER
CH
LOGGING
MEMORY
ABC
DEF
JKL
GHI
MNO
WXYZ
TUV
Symbol
PQRS
D
Bottom of the
main unit (8-pin)
Main unit
Personal computer
Plug this cable into the connector so that the
“ ” mark on the grip faces downward.
Serial port of the personal
computer (with 25-pin connector)
Dedicated cable (Model name: 910 09)
1
4
2
2
3
5
4
3
7
7
8
7
5, 6 (N.C.)
Connection between connector pins
(Round DIN 8-pin to D-sub 25-pin)