YOKOGAWA TM10, Инструкция по эксплуатации, Страница: 23 / 92

15
IM 54051-E
3 Setting Up with the Main Unit
15 15
Preparation for
Measurement
7.
Enter the upper-limit temperature.
Hi Alarm
+ 0 2 0 . 0 ° C
[TIP]
To set a negative value, press either the [
▼
] or
[
▲
] key. The “+” symbol on the screen will
change to a “-” symbol.
See Also
For information about entering a character or
number, refer to “6 How to Input Characters”
in the “ Information Required before Use” part.
8.
Press the [SET] key.
The specified upper-limit temperature is set and the
screen to set the “Lo Alarm” function ON/OFF will
appear on the screen.
Lo Alarm
ON
9.
Use either the [
▼
] or [
▲
] key to set the
lower-limit temperature alarm function
ON/OFF.
10.
If “ON” has been selected, press the
[SET] key.
The “Lo Alarm” setting screen will appear on the
screen.
If “OFF” has been selected in step 9, this screen will
not appear. In this case proceed to step 12.
Lo Alarm
+ 0 0 0 . 0 ° C
11.
Enter the lower-limit temperature.
Lo Alarm
+ 0 2 0 . 0 ° C
[TIP]
To set a negative value, press either the [
▼
] or
[
▲
] key. The “+” symbol on the screen will
change to a “-” symbol.
12
.Press the [SET] key.
The specified lower-limit temperature is set and the
“Inverse alarm function” screen will appear on the
screen.
Turn
OFF
13
.Use either the [
▼
] or [
▲
] key to select
whether the operation of the alarm func-
tion is to be inverted. If ON is selected,
the alarm function will operate under the
inverse conditions.
14
.Press the [SET] key.
The range in which the alarm sounds will be dis-
played.
Then, the screen for confirming the setting will ap-
pear.
Yes1/No0
Change?
15
.Press the [1] key.
The alarm function will be set for each tag.
Press the [ESC] key repeatedly to return to the Home
screen.
-End of procedure-