
25
IM 54051-E
4 Setting Up with the Personal Computer
25
25
Preparation for
Measurement
7.
Click on the [Start Setup] button.
[TIP]
Do as follows to change the application install destination.
1.Click on the [Change Directory] button.
2.Select a installation destination folder.
3.Click on the [OK] button.
After installation has been completed, the following confirmation window is displayed.
8.
Click on the [OK] button.
-End of procedure-
■
Confirming the communication environment (on the personal computer)
Confirm the settings related to the communication environment on the personal computer.
1.
Select “Thermo-Collector” in the “Programs” accessed from the “Start” menu.
2.
Select “Properties” from the “Comm” menu.
The “Properties” window will be displayed.
3.
Confirm that the settings are exactly as shown in the above figure.
If any of the settings are different, set them to the values given below.
Setup item
Setting value
CommPort
1
Baud Rate
9600
Parity
None
Data Bits
8
Stop Bits
2
[TIP]
The communication port setting values vary, depending on the type of personal computer. For more
information, refer to the manual supplied with your personal computer.
-End of procedure-