YOKOGAWA IR800G, Руководство пользователя

Страница: 94 / 127

IM 11G06A01-02EN
5-39
5. SCREENS
1st Edition : Oct. 27, 2023-00
(6) If you operated the valve manually, restore the valve status here.
• To continue calibration, tap the [Continue]. The Calibration menu screen
appears.
• To exit, touch the [End] button.
The replacement time in progress screen will be displayed. (The
replacement time is the same as the replacement time for automatic
calibration. See 5.1.2 Auto Calibration Setting)
If the replacement time has elapsed when the "End" button is touched, the
measurement screen will be displayed.
[Continue] Calibration menu
[End]
(7) In the Replace time in progress screen, all Ch (components), as well
as the calibration target, are displayed. The display range is shown
according to the range-switching setting.
Make sure that the influence of the calibration gas no longer exists.
After the replacement time has elapsed, the measurement screen is
automatically displayed. Touching the [Abort] immediately terminates the
replacement time and displays the measurement screen.
● Contact output during manual zero calibration
If "for sample switching" or "system calibration" is assigned to the contact output in addition to "for
zero calibration," the contact output changes as shown in Figure 5.9 and Figure 5.10 according to
the gas flow channel setting in the auto-calibration setup. (See 5.2.3 Contact output setting
for the function assigned to the contact output and 5.1.2 Auto Calibration Setting for the gas flow
channel.)
for sample switchover
for zero calibration
Tap [Next]. End of calibration Tap [Enter].
Figure 5.9 Gas flow channel setting: analyzer
for system
calibration
for zero
calibration Tap [Next].
End of calibration Tap [Enter].
The contact output for "sample switching" remains ON
Figure 5.10 Gas glow channel setting: Sampling system