YOKOGAWA IR800G, Руководство пользователя

Страница: 89 / 127

IM 11G06A01-02EN
5-34
5. SCREENS
1st Edition : Oct. 27, 2023-00
l
Password setting
(1) Tap the password you wish to set on the password setting screen and
enter the password string in the keyboard dialog that appears.
You cannot set only the execution password.
The password can be up to 12 alphanumeric characters and symbols.
When you enter the password, the icon in the upper right corner will
change to a save icon
(2) Tap the save icon. The change is confirmed when it changes to the home
icon.
CAUTION
If you set a password, be sure to write it down.
If a password has been set, entering protected operations such as
equipment setup or calibration will prompt you for the password.
If the correct password cannot be confirmed, a message stating that the
password is wrong will be displayed.
After entering the correct password, the screen will change to the operator ID
entry screen.
(3) Tap "Password" to display the password setting screen. Tap
[Commissioning Pass], [Execute Pass] and the respective items to set
them.
The operator ID is recorded in the event log information to identify the
person who performed the operation. You can proceed without entering
anything. The Operator ID can be up to 4 characters long.