YOKOGAWA IR800G, Руководство пользователя

Страница: 92 / 127

IM 11G06A01-02EN
5-37
5. SCREENS
1st Edition : Oct. 27, 2023-00
l
Touch panel
Calibrate or test the touchscreen
(1)Follow the on-screen instructions to touch the "+ " position. If you keep your finger on the screen for a
while, the message will change as shown on the right. When the message changes, remove your finger.
(2) Repeat the same procedure four times in order: upper left, lower right, upper right, and lower left of the
screen. A confirmation screen appears after the touch-adjustment. When the screen is touched, the
touched coordinates are displayed as shown on the right. Touch the cross (+) position and confirm that
the displayed coordinates are OK. (A few dots of misalignment in both the X and Y directions should
cause no operational problems.)
(3) Touch and hold the screen for 3 seconds as instructed on the screen to complete the confirmation and the
screen adjustment screen appears.
l
Brightness
Adjust the screen brightness.
Tap the combo box ( ) to display the Brightness selection dialog box. Scroll through the
screen with the and select the brightness you wish to set. Once selected, the dialog will be cleared
and the screen will immediately display the selected brightness.
(Selectable from 10% to 100% in 10% increments. Default value 50%)