8-5
IM 701510-01E
Analyzing W
aveforms
8
8.2
Measuring an X-Y Waveform using Cursors
1.
Display both the T-Y and the X-Y waveform in the same display.
2.
Press the
CURSOR key
to display the cursor measurement setting
menu.
3.
Press the “
Cursor
” soft key and select “
ON
”.
4.
Press the “
Type
” soft key to display the measurement type selection
menu.
Measuring time difference/ voltage using the X-Y cursors
5.
Press the “
X-Y
” soft key. The X-Y cursors will appear on the screen.
6.
Use the rotary knob to adjust the position of the X-Y cursor.
Measuring only voltage difference on the X axis using the vertical
cursors
5.
After step 4 has been completed, press the “
dX
” soft key to display the
cursor setting menu. The vertical cursors will appear on the screen.
6.
After having pressed any of the “
T1
”, “
T2
” or “
T1&T2
” soft keys, use
the rotary knob to adjust the position of the cursor.
Measuring only voltage difference on the Y axis using the
horizontal cursors
5.
After step 4 has been completed, press the “
dY
” soft key to display the
cursor setting menu. The horizontal cursors will appear on the screen.
6.
After having pressed any of the “
H1
”, “
H2
” or “
H1&H2
” soft keys,
use the rotary knob to adjust the position of the cursor.
Explanation
Channel assignment for the X-Y axis
X-axis
Input voltage of CH1
Y-axis
Input voltage of CH2
Waveforms which cannot be measured
For waveforms which cannot be measured, refer to page 8-2.
Keys and Procedure
CURSOR key
Rotary knob
Soft keys
<, > keys
