5-5
IM 701510-01E
Setting the V
ertical and Horizontal
Axes
5
5.4
Inverting a Waveform
1.
Press the
INPUT key
corresponding to the channel whose waveform
is to be inverted. The input setting menu will be displayed.
2.
Press the “
Invert
” soft key to select “
ON
”.
Explanation
Relevant channels
The input signals for channels CH1 to CH4 (for DL1520/DL1520L, CH1/CH2) can be
inverted independently of one another. Each time the soft key is pressed, “ON” or “OFF”
are displayed alternately, and the waveform will be inverted accordingly.
Indication of an inverted signal
When a waveform is inverted, the corresponding trace number is highlighted as shown
below.
Points to note
• Cursor measurement, automated measurement, waveform math and GO/NO-GO
determination are performed on the inverted waveforms, not on the original ones.
• The waveform data that will be saved in the acquisition memory will not be inverted, so
care must be taken when saving the acquisition data.
Keys and Procedure
INPUT key
Soft keys
