YOKOGAWA DL 1520 Скачать руководство пользователя страница 134

Страница: 134 / 201

12-3

IM 701510-01E

Saving and Loading Data from a Flopply Disk

Points to note concerning formatting

• The following three directories are created automatically when a floppy disk is formatted

using this instrument.

DL_WAVE

Directory for “BIN” (binary) waveform data

DL_SETUP

Directory for “SETUP” (setting parameters)

DL_MISC

Directory for “P-P” and “ASCII” waveform data, as well as “HP-GL”,
“PS” (Postscript), “TIFF” and “BMP” screen image data

• Floppy disks formatted in a format other than those specified on the previous page cannot

be used.

• If an error message appears when formatting has been completed, the floppy disk may be

damaged.

• Formatting the floppy disk will erase all data on the disk. Be careful.

CAUTION

Never remove the floppy disk while the access indicator of the floppy disk
drive is lit, or damage to the magnetic head of the drive or loss of data on the
floppy disk may result.

12.2 Formatting a Floppy Disk

Содержание DL 1520










































































































































































































Результаты поиска

Содержание DL 1520

Отзывы:

Похожие инструкции для DL 1520

Бренды по названию

Популярные бренды

YOKOGAWA DL 1520, Руководство пользователя

Результаты поиска

Содержание DL 1520

Отзывы:

Похожие инструкции для DL 1520

Бренды по названию

Популярные бренды