4 Operation
4.6.5 Absolute Data Reception Sequence
4-42
Note: The output pulses are phase-B advanced if the servomotor is turning forward regardless of the setting in Pn000.0.
Rotational serial data:
Indicates how many turns the motor shaft has made from the reference position, which was the position at
setup.
Initial incremental pulses:
The initial incremental pulses that provide absolute data is the number of pulses required to rotate the motor
shaft from the servomotor origin to the present position. Just as with normal incremental pulses, these pulses
are divided by the dividing circuit inside the multi-winding drive unit and then output.
The initial incremental pulse speed depends on the setting of the encoder output pulses (Pn212). Use the fol-
lowing formula to obtain the initial incremental pulse speed.
Final absolute data P
M
is calculated by following formula.
P
E
= M
×
R + P
O
P
S
= M
S
×
R + P
S
’
P
M
= P
E
- P
S
Note: The following formula applies in reverse mode. (Pn000.0 = 1)
P
E
= –M
×
R + P
O
P
S
= M
S
×
R + P
S
'
P
M
= P
E
– P
S
Setting of the Encoder Output Pulses
(Pn212)
Formula of the Initial Incremental Pulse Speed
16 to 16384
16386 to 32768
32772 to 65536
65544 to 131072
131088 to 262144
680
×
Pn212
16384
[kpps]
680
×
Pn212
32768
[kpps]
680
×
Pn212
65536
[kpps]
680
×
Pn212
131072
[kpps]
680
×
Pn212
262144
[kpps]
Coordinate
value
Value of M
Reference position
(at setup)
Current position
- 1
0
+1
+2
+3
+2
+1
-1
±
0
P
E
P
M
P
S
P
O
M
×
R
Rotation
Signal
Meaning
P
E
Current value read by encoder
M
Rotational serial data
P
O
Number of initial incremental pulses
P
S
Absolute data read at setup (This is saved and controlled by the host controller.)
M
S
Rotational serial data read at setup
P
S
’
Number of initial incremental pulses read at setup
P
M
Current value required for the user’s system
R
Number of pulses per encoder revolution (pulse count after dividing, value of Pn212)
Содержание Sigma-V JUSP-MD D A Series
Страница 21: ...xxi Index Index 1 Revision History ...