11.1 Feedback Option Modules
11.1.1 Fully-Closed Modules
11-4
Equipment Configurations
Connections to Linear Encoder from Dr. JOHANNES HEIDENHAIN
GmbH
Connections for a 1 Vp-p Analog Voltage Output Signal
You must make the connections through a Yaskawa Serial Converter Unit. The output signal
will be multiplied by 8 bits (256 divisions) in the Serial Converter Unit.
*1.
When using a JZDP-J00
-
Serial Converter Unit, do not use a Yaskawa Linear Encoder Cable that is lon-
ger than 3 m.
*2.
Contact Dr. JOHANNES HEIDENHAIN GmbH for details on cables (analog 1 Vp-p output, D-sub 15-pin, male)
from Dr. JOHANNES HEIDENHAIN GmbH.
*1.
The model number of a set that includes the SERVOPACK and an Option Module is not hyphenated after
“SGD7S.”
*2.
When ordering a SERVOPACK and a Fully-Closed Module separately, use this Fully-Closed Module model num-
ber.
*3.
One Option Case Kit is required for each SERVOPACK.
The set includes the module cover, PCB mounting plate, and two mounting screws.
Note: 1. Refer to the following section for a table of the recommended Linear Encoders.
9.1 Recommended Linear Encoders
on page 9-2
2. Refer to the following section for the specifications of the Serial Converter Unit.
9.4 Serial Converter Unit
on page 9-30
3. Refer to the chapter for your Rotary Servomotor for information on Servomotor Main Circuit Cables and
Encoder Cables.
4. If you purchase a Fully-Closed Module by itself, refer to the following manual for the method to mount it to
the SERVOPACK.
Σ
-V Series/
Σ
-V Series for Large-Capacity Models/
Σ
-7 Series Installation Guide Fully-Closed Module (Document
No.: TOBP C720829 03)
No.
Item
Model
Reference
Fully-Closed Module
(Purchased as a set with the
SERVOPACK)
Without options: SGD7S
0A000
1
*1
With options: SGD7S
0A
1
*1
Note: When a hardware option is mounted,
is
replaced with a three-digit number that specifies
the type of option.
–
Fully-Closed Module
(Purchased alone)
Fully-Closed Module
*2
SGDV-OFA01A
11-9
Option Case Kit
*3
SGDV-OZA01A
11-13
Serial Converter Unit Cable
JZSP-CLP70-
-E
Serial Converter Unit
JZDP-H003-000
Linear Encoder Cable
JZSP-CLL30-
-E
9-20
CN
3
1
CN2
Cable from Dr. JOHANNE
S
HEIDENHAIN GmbH
*2
Linear Encoder from
Dr. JOHANNE
S
HEIDENHAIN GmbH
Linear Encoder Cable
*1
S
erial Converter Unit
S
erial Converter Unit Cable
Connection to encoder in Rotary
S
ervomotor
Encoder Cable
Fully-Clo
s
ed
Module
S
ERVO-
PACK