92
En
Saving and recalling the system settings (System Memory)
If you load the system settings, the settings currently configured
are overwritten. If you do not want to erase the current settings,
save the settings using the System Memory feature in advance.
■
Loading by the
7
SYSTEM MEMORY
buttons
You can recall the system settings stored in “Memory1” to
“Memory4” by pressing the corresponding
7
SYSTEM
MEMORY
buttons.
1
Press one of the
7
SYSTEM MEMORY
buttons on the remote control to select the
desired memory number.
“Memory1 LOAD” (example) appears in the front
panel display.
y
“Empty” appears in the menu screen if no system settings
are stored in the selected memory number.
2
Press the selected
7
SYSTEM MEMORY
button once more to confirm the selection.
This unit loads the settings stored in the selected
memory number.
■
Loading by the GUI menu operation
1
Follow steps 1 to 4 in “Saving by the GUI
menu operation” (page 90).
2
Press
9
k
/
n
repeatedly to select “xxx Load”
and then press
9
h
.
“xxx” indicates the zone you selected in step 1.
3
Press
9
k
/
n
repeatedly to select the desired
memory number and then press
9
ENTER
.
y
If the memory number you selected is empty, “Memory
Empty” appears.
4
Press
9
k
/
n
/
l
/
h
repeatedly to select
“LOAD” and then press
9
ENTER
to load
the settings stored in the selected memory
number.
y
To cancel the operation and return to the previous menu,
select “CANCEL” and then press
9
ENTER
.
5
Press
I
MENU
to turn off the GUI menu.
Loading the system settings
Note
4
3
SYSTEM MEMORY
2
1
