Yamaha RCX142, Руководство пользователя

Страница: 357 / 450

6-
21
6
Parallel I/O interface
2. Option I/O interface overview
2.7.3 General-purpose output signal reset (off)
All the general-purpose output signals are reset in the following cases.
1) When
F 5
(RST.DO) is selected in “UTILITY” mode.
2) When any of the following operations is performed while no sequencer program is
executed.
■
When compiling in program mode and it was routinely quit.
■
When compiling the program in automatic mode, and compiling was routinely
quit.
■
When
F 1
(RESET) is executed in “AUTO” mode.
■
When in Auto mode, the dedicated input signal DI15 (program reset input) was
set on while the program was being stopped.
■
When either of the following was initialized in “SYSTEM” mode initialization.
1. Program memory (SYSTEM>INIT>MEMORY>PROGRAM).
2. Entire memory
(SYSTEM>INIT>MEMORY>ALL).
■
In “AUTO” mode
F 7
(DIRECT), when SWI command was executed.
■
When online commands @RESET, @INIT PGM, @INIT MEM, @INIT ALL,
@SWI were executed.
■
When the HALT statement was executed during the program.