Yamaha RCX142, Руководство пользователя

Страница: 412 / 450

10-
18
T
roubleshooting
10
1. Error Messages
5.48 : END SELECT without SELECT
Code : &H0530
Meaning/Cause : There is no SELECT statement corresponding to END SELECT
statement.
Action
: 1. Delete the END SELECT statement.
2. Add a SELECT statement corresponding to the END SE-
LECT statement.
5.49 : SELECT without END SELECT
Code
: &H0531
Meaning/Cause : There is no END SELECT statement corresponding to SELECT
statement.
Action : 1. Delete the SELECT statement.
2. Add an END SELECT statement corresponding to the SE-
LECT statement.
5.50 : CASE without END SELECT
Code : &H0532
Meaning/Cause : There is no END SELECT statement corresponding to CASE state-
ment.
Action : 1. Delete the CASE statement.
2. Add an END SELECT statement corresponding to the CASE
statement.
5.51 : Illegal command line
Code
: &H0533
Meaning/Cause : Cannot execute command statement between SELECT and CASE
statements.
Action : Delete the command statement between SELECT and CASE state-
ments.
5.52 : Command doesn’t exist
Code : &H0534
Meaning/Cause : Line does not have a command statement.
Action
: 1. Add a command statement.
2. Delete the line that does not have a command statement.
5.53 : Compile failure
Code : &H0535
Meaning/Cause : Error occurred in software
Action
: Report details of error to our company.
5.54 : ELSEIF without IF
Code : &H0536
Meaning/Cause : There is no IF statement corresponding to ELSEIF statement.
Action
: 1. Delete the ELSEIF statement.
2. Add an IF statement corresponding to the ELSEIF statement.