manualshive.com logo in svg

Yamaha CL5, Справочное руководство

Yamaha CL5 - профессиональная цифровая аудио консоль для живого выступления. Дополнительное пошаговое руководство поможет вам максимально раскрыть потенциал этого устройства. Скачайте его бесплатно с manualshive.com и наслаждайтесь удобством работы с Yamaha CL5 на полную мощность.

Поделиться
Скачать
background image

Warning/Error Messages

 

251

 

Reference Manual 

 

 

 

 

 

Message

 

Meaning

 

Processing Aborted.

 

Processing was interrupted. 

Recorder Busy:   Operation Aborted!

 

The button operation was canceled because recorder processing 
required time. 

RECORDER:   CODEC Error [0x%08X] !

 

A codec error occurred in the RECORDER screen. 

RECORDER IN CUE:   Turned Off.

 

CUE was canceled for RECORDER IN because you switched from 
the RECORDER screen to another screen. 

Re-Enter Password!

 

When specifying the user password, the password was not entered a 
second time. 

REMOTE:   Data Framing Error! 
REMOTE:   Data Overrun!

 

Invalid signals are being input to the Remote connector. 

REMOTE:   Rx Buffer Full!

 

Too much data is being received at the Remote connector. 

REMOTE:   Tx Buffer Full!

 

Too much data is being sent from the Remote connector. 

Removed from the Channel Link group.

 

The channel was removed from the link group. 

Saving Aborted.

 

Saving to the USB flash drive has been interrupted. 

Saving Finished.

 

Finished saving to USB flash drive. 

SCENE #xxx is Empty!

 

No data has been stored in the scene you attempted to recall, or the 
data has been damaged so that it cannot be recalled. 

SCENE #xxx is Protected!

 

You attempted to overwrite (store) a protected scene. 

SCENE #xxx is Read Only!

 

You attempted to overwrite (store) a read-only scene. 

Scene Playback Link Canceled!

 

The audio playback link for the scene was canceled. 

SLOT x:   Data Framing Error! 
SLOT x:   Data Overrun!

 

Invalid signals are being input to the SLOT x input port. 

SLOT x:   Rx Buffer Full!

 

Too much data is being received at the SLOT x input port. 

SLOT x:   Tx Buffer Full!

 

Too much data is being transmitted from the SLOT x output port. 

Some Song Files Are Unidentified.

 

Some songs were not identified.  Songs that have not been specified 
might be used for DIRECT PLAY or SCENE PLAY BACK LINK. 

Song File Not Found!

 

The file specified for SCENE LINK or DIRECT PLAY assigned to a 
USER DEFINED key does not exist. 

STAGEMIX:   Data Framing Error! 
STAGEMIX:   Data Overrun!

 

Invalid signals are being exchanged with StageMix. 

STAGEMIX:   Rx Buffer Full!

 

Too much data is being received at the StageMix input port. 

STAGEMIX:   Tx Buffer Full!

 

Too much data is being transmitted from the StageMix output port. 

STEREO Mode : Cannot Use This 
Function.

 

You cannot use this function in Stereo mode. 

STEREO MODE ON.

 

The console has switched to Stereo mode. 

Storage Full!

 

The file could not be saved because there is insufficient space on the 
USB flash drive. 

Storage Not Found!

 

The USB flash drive could not be recognized. 

Storage Not Ready!

 

Access is not possible because the USB flash drive is not ready. 

SURROUND Mode : Cannot Use This 
Function.

 

You cannot use this function in Surround mode. 

 

Message

 

Meaning

 

Loading Aborted.

 

Loading from USB flash drive was aborted. 

Loading Finished.

 

Finished loading from USB flash drive. 

Low Battery!

 

The backup battery voltage is low. 

Maximum Number of Audio Files 
Exceeded!

 

The number of songs that can be managed by the USB memory 
recorder has been exceeded. 

Memory Error.

 

The R series backup memory is corrupted. 

MIDI:   Data Framing Error! 
MIDI:   Data Overrun!

 

An inappropriate signal is being input to the MIDI input port. 

MIDI:   Rx Buffer Full!

 

Too much data is being received at the MIDI input port. 

MIDI:   Tx Buffer Full!

 

Too much data is being transmitted from the MIDI output port. 

Monitor Assignment is Restricted to 
Max. 8 Sources!

 

The Monitor Define function allows a maximum of eight sources to be 
selected, but you attempted to assign more than eight. 

No Access From Recorder!

 

In the RECORDER screen, it is not possible to move to a level higher 
than \YPE\SONGS\. 

No Channel Selected.

 

A copy-source channel was not selected in the GLOBAL PASTE 
screen. 

No Copy Item Selected.

 

In the GLOBAL PASTE screen, you attempted to paste without having 
selected an item to paste. 

No Corresponding Help Items.

 

The corresponding section was not found in the Help file. 

No ID3 Tag exists. You can not edit.

 

The music file cannot be edited because it has no ID3 tag. 

No Response from External HA.

 

No response from an external AD8HR. 

No Response from I/O DEVICE.

 

The I/O devices not responding. 

Operating as the word clock master.

 

This console is the Clock Master. 

Page Bookmarked.

 

The current screen or popup has been bookmarked. 

Parameter out of range!

 

Some data could not be loaded because the parameters do not 
match. 

Password Changed.

 

The password has been changed. 

PlayBack Failed:   Recorder is Busy!

 

Audio file link playback is not possible because recording is in 
progress. 

PLAYBACK OUT CUE:   Turned Off.

 

CUE was canceled for PLAYBACK OUT because you switched from 
the RECORDER screen to another screen. 

Please use Dante Controller.

 

The Dante Patch settings from the console are not valid. 

Please wait, Dante patch is proceeding 
now.

 

You attempted to edit in the DANTE PATCH screen at a time when 
patching was not possible. 

 

Power Supply Fan has Malfunctioned!

 

The cooling fan of the internal power supply has stopped. Please 
contact your Yamaha service center listed at the end of the Owner's 
Manual (separate document). 

PREVIEW Mode : Cannot Use This 
Function.

 

The operation was ignored because this function cannot be used 
during Preview. 

PREVIEW Mode : Disabled

 

Preview was disabled. 

PREVIEW Mode : Enabled

 

Preview was enabled. 

 

USO 

RESTRITO

Содержание CL5



















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CL5

Samsung SyncMaster 2023 NW User Manual preview
SyncMaster 2023 NW
Бренд: Samsung Страницы: 68
Samsung SyncMaster 720B User Manual preview
SyncMaster 720B
Бренд: Samsung Страницы: 78
Synergy Global Technology ID-26Aw-LED User Manual preview
ID-26Aw-LED
Бренд: Synergy Global Technology Страницы: 28
Kodak CFH-V15 User Manual preview
CFH-V15
Бренд: Kodak Страницы: 6
Riken Keiki OX-07 Operating Manual preview
OX-07
Бренд: Riken Keiki Страницы: 25
Omron HEM-609 Instruction Manual preview
HEM-609
Бренд: Omron Страницы: 9
Advocate SPBP-04 Instruction Manual preview
SPBP-04
Бренд: Advocate Страницы: 26
Barco MDSC-2326 MNAH User Manual preview
MDSC-2326 MNAH
Бренд: Barco Страницы: 78
A&D UB-401 Instruction Manual preview
UB-401
Бренд: A&D Страницы: 46
Daktronics ProPixel PSX-5901-125MN-3 Quick Manual preview
ProPixel PSX-5901-125MN-3
Бренд: Daktronics Страницы: 5
Uniden BW4151 Owner'S Manual preview
BW4151
Бренд: Uniden Страницы: 24
Covita Bedfont Micro 4 Smokerlyzer Operating Manual preview
Bedfont Micro 4 Smokerlyzer
Бренд: Covita Страницы: 18
Proteus BC-66033 Instruction Manual preview
BC-66033
Бренд: Proteus Страницы: 11
Viotek GFV24C User Manual preview
GFV24C
Бренд: Viotek Страницы: 20
Icop PRTD-090T-5A-N4F User Manual preview
PRTD-090T-5A-N4F
Бренд: Icop Страницы: 32
Microlife BP AG1-30 Manual preview
BP AG1-30
Бренд: Microlife Страницы: 60
Omron XPECTIA FZD Datasheet preview
XPECTIA FZD
Бренд: Omron Страницы: 6
7starlake SKY12-H06 User Manual preview
SKY12-H06
Бренд: 7starlake Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды