6S35H11
1-26
9
8
7
6
5
4
3
2
1
Predelivery check
Checking the outboard motor
mounting height
1.
Check that the anti-cavitation plate is
aligned with the bottom of the boat. If the
mounting height is too high, cavitation will
occur and propulsion will be reduced.
Also, the engine speed will increase
abnormally and cause the engine to over-
heat. If the mounting height is too low,
water resistance will increase and reduce
engine efficiency.
NOTE:
The optimum mounting height is affected by
the combination of the boat and the outboard
motor. To determine the optimum mounting
height, test run the outboard motor at differ-
ent heights.
2.
Check that the clamp brackets are
secured with the mounting bolts.
Checking the remote control cable
1.
Set the remote control lever to the neutral
position and fully close the throttle lever.
69D10080
2.
Check that the control lever
1
is in its
fully closed position, and check that the
center of the throttle cam roller
2
aligned
with the alignment mark
a
.
3.
Check that the remote control lever is in
the neutral position, and check that the
center of the set pin
3
is aligned with the
alignment mark
b
on the bottom cowling.
c
C
The shift / throttle cable joint must be
screwed in a minimum of 8.0 mm (0.31 in)
c
.
1
a
2
6S310100
6S310020
3
b
c
6S310050
6S35H11_01 9/2/05 6:41 PM Page 29
Содержание 250GETO
