Yamaha 250GETO, Руководство по обслуживанию

Страница: 176 / 293

LOWR
6-39 6S35H11
Lower unit
Checking the propeller shaft
1. Check the each propeller shaft. Replace
if bent or worm the spline.
2. Measure the propeller shaft runout.
3. Check the dog clutch, shift rod joint, and
slider. Replace if cracked or worn.
Assembling the forward gear
1. Install the new needle bearing into the
forward gear to the specified depth.
6. Remove the oil seals and needle bearing.
Disassembling the forward gear
1. Remove the needle bearing and bushing
from the forward gear using the chisel.
c C
Do not reuse the bearing, always replace
it with a new one.
Checking the propeller shaft
housing
1. Clean the propeller shaft housing using a
soft brush and cleaning solvent, and then
check it. Replace if cracked or damaged.
2. Check the bearings. Replace if pitted or if
there is rumbling.
Needle bearing attachment
1
:
90890-06610
Driver rod SS
2
: 90890-06604
Bearing depth plate
3
:
90890-06603
S60V6720
u
y
Needle bearing attachment
y
:
90890-06611
Driver rod L3
u
: 90890-06652
6S360300
6S360320
2
1
a
3
Depth
a
:
11.75–12.25 mm (0.46–0.48 in)
6S360310
Runout limit: 0.02 mm (0.0008 in)
6S35H11_061 05.9.5 14:14 Page 42