manualshive.com logo in svg

Xerox Phaser 790, Документация

Поделиться
Скачать
Xerox Phaser 790 Скачать руководство пользователя страница 464

23.  Problem Solving

Network Problem Solving

23-40

Xerox Phaser 790

Message

Setup screen

Description and action

______ is empty.

Navigating NDS Tree
(Network
Setup>Service
Setup>PServer
Setup>NDS Setup)

The selected container has no
subcontainers or objects
relevant to the current mode of
navigation.

If you plan to use
NDS, set up NDS
before Bindery.

Bindery Setup
(Network Setup>
Service Setup>PServer
Setup> Bindery Setup)

No NDS settings are present.
You are reminded to perform
NDS Setup before Bindery
Setup in case the network
includes both NDS and bindery
servers.

Error. Cannot open
bindery connection
to NDS server.

Select File Server
From List
(Network Setup>
Service Setup>PServer
Setup> Bindery Setup)

Select this server through NDS
Setup or disable NDS and
select it through bindery.

No NetWare file
server found.

Select File Server
From List
(Network Setup>
Service Setup>PServer
Setup> Bindery Setup)

No file server was found when
the Phaser 790 queried the
network to create a list of
supported servers or a list of all
servers.

Check cable connections and
ensure that the NetWare server
is switched on.

File Server name not
found. Try again?

Enter First Letters of
Server Name
(Network Setup>
Service Setup>PServer
Setup> Bindery Setup)

No file server with those letters
was found when the Phaser
790 queried the network.
Check the name of the
NetWare file server, check
cable connections, and ensure
that the NetWare server is
switched on.

No file server is
selected.

View Server List, Edit
Connection
(Network Setup>
Service Setup>PServer
Setup> Bindery Setup)

No file server has been added
in Bindery Setup.

Содержание Phaser 790































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды