Xerox Phaser 790, Документация

Страница: 422 / 542

22. Using ColorWise Pro Tools
Xerox Phaser 790 22–16
Defining Profiles
Before you can apply any downloaded or edited profile to a print job, that
profile must be linked to one of the predefined custom names, or you can set
the profile as the default for all print jobs. There are 10 names available for
custom profiles – Source - 1 through 10 for RGB Source, Simulation - 1
through 10 for Simulation, or Output - 1 through 10 for Output.
A custom simulation profile is used to illustrate this procedure. The same steps
apply for defining custom or downloaded output profiles.
To Define a Profile
1. Launch ColorWise Pro Tools and click Profile Manager.
For the purposes of this example, assume DIC-new is a custom
simulation profile created with Color Editor. As you can see, DIC-new
has no information under the heading “Appear in Driver as”.
2. Select DIC-new in the Simulation list, and click Profile Settings or
double-click DIC-new.
3. Select the “Appear in Driver as” checkbox, choose one of the predefined
custom simulation names (Simulation-1 through Simulation-10) from the
pop-up menu, and then click Apply.
Make sure to choose a name that is not already linked with another
simulation. If you try to define two profiles with the same name, you will
get and error message.
For an output profile, the predefined custom names would be Output-1
through Output-10.
While you can not delete a preset profile, you can use a preset profile’s name
for your edited profile when you select the “Appear in Driver as” option. This
replaces the preset profile with your own profile.
When you choose Profile Settings for an output profile, the use
Calibration Set option also appears. You must calibrate the Fiery with
this calibration set before this option has any effect. If you have never
measured for this calibration set, default measurements will be used.
In Profile Settings you can also change profile descriptions for all non-
locked profiles.
4. Click OK.
Simulation-1 now appears under the “Appear in Driver as” column for
DIC-new. Choosing Simulation-1 from the CMYK Simulation option of
the printer driver applies the DIC-new simulation to the print job.
If you do not define a custom simulation profile, your job will print with
CMYK Simulation Profile set to None. If you do not define a custom
RGB Source or Output profile, the default profile is used.