manualshive.com logo in svg

Xerox Phaser 790, Документация

Поделиться
Скачать
Xerox Phaser 790 Скачать руководство пользователя страница 353

17.  Managing print jobs at the Command WorkStation

Xerox Phaser 790

17–17

Importing archived jobs from external media

You can use the Import command to find and retrieve jobs previously
archived to external devices. This command can be used to retrieve
files archived from the current printer or from another printer that
supports external archiving.

To import an archived job from an external device:

1. 

Perform one of the following:

•

 

Select 

Import

 from the Job menu in the Queues window.

•

 

Right-click the 

Spool status bar

 and select 

Import

.

2. 

Select the device containing the job(s) you want to import.

3. 

Select 

Add

 to import files from other archived volumes.

4. 

Select 

OK

.

The job is imported to the same area in the Queues window
(Spool or RIP) from which it was archived.

Содержание Phaser 790































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды