manualshive.com logo in svg

Xerox Phaser 790, Документация

Поделиться
Скачать
Xerox Phaser 790 Скачать руководство пользователя страница 203

10.  Installing user software in a Windows 2000 environment

Xerox Phaser 790

10–25

3. 

Double-click the 

Computers Near Me

 icon.

4. 

Browse for the 

printer

. Refer to the Configuration page for this

information. If you cannot locate your Phaser 790, see your
system administrator.

5. 

Double-click the 

name

 of the printer to display enabled print

connections.

6. 

Double-click the 

name

 of the desired printer connection.

The Printers dialog box is displayed, asking whether you would
like to set up the printer.

7. 

Select 

Yes

 to install the PostScript or PCL printer driver and

printer description file for the selected connection.

Depending on the Point and Print Drivers option specified in
Network Setup, the PostScript or the PCL printer driver and
printer driver files are automatically installed.

The Add Printer Wizard is displayed.

Содержание Phaser 790































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды