manualshive.com logo in svg

Xerox Phaser 790, Документация

Поделиться
Скачать
Xerox Phaser 790 Скачать руководство пользователя страница 150

8.  Setting up the network server

Xerox Phaser 790

8–14

The printer on a network with UNIX workstations

When a UNIX workstation is configured with the lpd protocol and
connected to the printer over a TCP/IP network, it can print directly to
the Phaser 790.

Setting up UNIX workstations requires an administrator with root
privileges. After the initial configuration, UNIX users simply submit print
jobs to a named printer.

The job management tools, along with the other Fiery utilities and Fiery
WebTools, are not available on the UNIX platform. A Windows or Mac
OS computer on the same network as the UNIX computer that is set
up to use TCP/IP for printing to the Phaser 790 can use the job
management tools to manage print jobs that originate from all
workstations on the network.

Setting up the printer in a UNIX environment has the same
requirements as setting up any printer or new device:

•

 

A distinct IP address is needed for the printer and for each
workstation on the network.

•

 

The printer is assigned a name that is associated with the IP
address.

•

 

The IP address of the printer must be registered for the network in
a host database and also on the printer itself.

•

 

The Print queue or the Hold queue (or both) must be published.

lpd printing to the Direct connection is not supported.

Содержание Phaser 790































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды