manualshive.com logo in svg

Xerox Phaser 790, Документация

Поделиться
Скачать
Xerox Phaser 790 Скачать руководство пользователя страница 169

9. Installing user software in a Windows 95/98 environment

Xerox Phaser 790

9–17

Setting up SMB printing on Windows 95/98

Use SMB or WINS printing if you do not have a Novell network.
Printing by this method enables printing from a workstation to a
particular print connection (Hold, Print, or Direct) on the Phaser 790.
The following procedure assumes you have the TCP/IP protocol and
Client for Microsoft Networks installed.

To set up printing to a second or third print connection. Repeat this
procedure for each and assign each printer a descriptive name during
the printer driver installation for subsequent identification purposes.

SMB printing is referred to as Windows Printing in Setup, on the
Control Panel and on the Configuration page.

1. 

Ensure that the printer is configured for SMB printing. For more
information, refer to the chapter 

Performing the setup from the

Printer Control Panel

.

2. 

At the workstation, double-click the 

Network Neighborhood

 icon

to display your network environment.

Содержание Phaser 790































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды