Xerox Phaser 790, Документация

Страница: 390 / 542

21. Performing the setup from WebSetup
Xerox Phaser 790 21–10
b. Select the Enable Parallel Port check box if you want to
print though the parallel port. This option enables you to
connect a single Windows workstation to the parallel port
and print directly to the printer. Enabling this option does not
conflict with Ethernet or Token Ring communication to the
printer. If this box is selected, the Ignore EOF Character and
Parallel Port timeout fields are enabled.
Select the Ignore EOF Character check box to direct the
printer to ignore end-of-file (EOF) messages and use the
Parallel Port timeout value to determine when the end of the
file has been reached. This option is required to print
PostScript files in binary (not ASCII) format. Under normal
circumstances, the box should not be checked.
To deselect the option (default), ensure there is no check
mark in the box.
From the Parallel Port timeout drop down box, select the
timeout interval in number of seconds (5-60). Until the
parallel port job times out, the server cannot receive new
jobs through the parallel port. The server can, however,
continue receiving network print jobs.
To deselect the option (default), ensure there is no check
mark in the box.