manualshive.com logo in svg

Xerox Phaser 790, Документация

Поделиться
Скачать
Xerox Phaser 790 Скачать руководство пользователя страница 120

6. Preparing for the setup

Xerox Phaser 790

6–8

Ensuring the printer connection

Complete the following steps before you configure the server and the
workstations that will print to the Phaser 790. A service technician may
have performed some initial installation.

1. 

Print a Test Page from the Printer Control Panel to ensure that
the printer is functioning normally in a stand-alone mode.

To print a Test Page:

a. 

Press the 

Menu

 button on the printer control panel until the

message 

Print Pages from List

 is displayed.

b. 

Press the 

Item/Enter

 button to display 

Print Configuration

.

c. 

Press 

Item/Enter

 to print the page.

2. 

Switch off the printer and connect the interface cable from the
printer to the server.

3. 

To confirm the connection, switch on the printer and print another
test page from the Printer Control Panel.

4. 

With the printer switched off, connect the network cable to the
network, as described in the chapter 

Connecting to the network

.

The network should already be installed and operational.

5. 

Switch on the printer.

6. 

Prepare network servers to share printer software and to enable
networked users to print to the Phaser 790.

Refer to the chapter 

Setting up the network server 

for details.

7. 

Perform Printer Setup as described in the chapter 

Performing the

setup from the Printer Control Panel

.

Содержание Phaser 790































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды