manualshive.com logo in svg

Xerox Phaser 790, Документация

Поделиться
Скачать
Xerox Phaser 790 Скачать руководство пользователя страница 330

16.  Introduction to the Command WorkStation

Xerox Phaser 790

16–30

Job Log window

The Job Log is a list of processed and printed jobs, the date and time
they were processed or printed, and the characteristics of the job. It
includes downloaded files and fonts and RIP and Hold jobs.

The Job Log window is not available if you logged in as Guest.

At any given time, the Job Log includes only those jobs processed or
printed since the Job Log was last cleared. The Job Log can be
cleared manually by selecting 

Clear Job Log

 from the Server menu or

automatically if the administrator has enabled autoclearing of the Job
Log in Setup. The Job Log is also cleared by selecting 

Clear Server

on the Printer Control Panel or by selecting the 

Clear

 command from

the Command WorkStation.

You can adjust the column widths in the Job Log display by selecting
the column border in the heading and dragging left or right. For more
information, refer to the chapter 

Managing print jobs at the Command

WorkStation

.

When you open the Job Log, you can select to display all jobs in the
current Job Log or only the jobs in a specified date range. By default,
all jobs are displayed.

Содержание Phaser 790































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды