manualshive.com logo in svg

Xerox Phaser 790, Документация

Поделиться
Скачать
Xerox Phaser 790 Скачать руководство пользователя страница 145

8.  Setting up the network server

Xerox Phaser 790

8–9

Configuring a Windows NT 4.0 server

Use the following procedure to configure a Windows NT 4.0 server to
communicate with the Phaser 790. Basic steps include:

•

 

Load the TCP/IP network protocol and configure it with an IP
address, Subnet Mask, and Gateway.

•

 

Enter the host name of the Phaser 790 in the host database

•

 

Perform Printer Setup.

•

 

On the Windows NT 4.0 server, create a printer for each print
connection, install the appropriate printer drivers, and (optionally)
share the printer on the network.

•

 

Enter the host name and remote printer name of the Phaser 790
in the printer connection.

•

 

If the Windows NT 4.0 server is also a workstation, install the
Fiery utilities.

More detail is provided in subsequent chapters and in your Microsoft
documentation.

Adding the Phaser 790 to the TCP/IP network
(Windows NT 4.0)

If your TCP/IP network consists of Windows NT 4.0 servers and
Windows NT 4.0 clients, perform the following procedure.

1. 

Register the IP address of the printer in the host name database
used by your system.

For installations that do not have a system administrator or a
central host name database, add the printer to the 

hosts

 file on

the Windows NT 4.0 server.

Add the printer to the 

hosts

 file on any workstations that have

TCP/IP loaded and will use the Fiery utilities.

Содержание Phaser 790































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды