Xerox Phaser 790, Документация

Страница: 164 / 542

9. Installing user software in a Windows 95/98 environment
Xerox Phaser 790 9–12
Setting up parallel port printing
1. Ensure that the printer is configured for parallel port printing. For
more information, refer to the chapters
Connecting to the network
and Performing the setup from the Printer Control Panel .
2. To spool files directly to the printer, set Port Timeout in Seconds
to 10 . To print directly to the Phaser 790, set Port Timeout in
Seconds to 5 .
Setting this option to 10 seconds ensures that spooling is not
interrupted due to timeout.
3. At the workstation, perform the following to change the BIOS
settings:
a. Restart the workstation and press the key indicated on the
monitor as soon as the workstation starts up. You may have
to scroll through several screens to reach the parallel port
settings.
b. Set Parallel Port Mode to ECP .
c. Save the changed setting and exit.
4. Select the Start, Settings , and Printers .
5. Select the Phaser 790 printer icon and select Properties from
the File menu.
6. Select the Details tab. In the Print to the following port drop down
list, select LPT1: (ECP Printer Port) .
Check this selection carefully. It may read LPT1 (Printer Port), which is not
equivalent to LPT1: (ECP Printer Port).
If this box does not read LPT1: (ECP Printer Port), change the
port setting now, as described in the section
To prepare the port
for parallel port printing and then return to this step. You may
need your Windows 95/98 system CD.