manualshive.com logo in svg

Xerox Phaser 790, Документация

Поделиться
Скачать
Xerox Phaser 790 Скачать руководство пользователя страница 228

11.  Installing user software in a Windows NT 4.0 environment

Xerox Phaser 790

11–16

3. 

Ensure that you are connected to LPT1 and select the 

Add Port

option to display a list of available ports.

4. 

Select the 

LPR Port

 option and select the 

New Port

 button.

If the LPR port is not listed, install the TCP/IP network protocol and Microsoft
TCP/IP printing software. (Access the software through My Computer/
Control Panels/Network/Services. Select the 

Microsoft TCP/IP printing

icon.). Refer to your Windows NT documentation for details.

5. 

Perform one of the following:

•

  If your network uses IP addresses, enter the Ethernet

TCP/IP 

IP address

 of the Phaser 790 in the Add LPR

compatible printer dialog box.

•

  If your network uses Domain Name Services (DNS), enter

the DNS name assigned to the printer.

Содержание Phaser 790































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды