manualshive.com logo in svg

Xerox Phaser 790, Документация

Поделиться
Скачать
Xerox Phaser 790 Скачать руководство пользователя страница 176

9.  Installing user software in a Windows 95/98 environment

Xerox Phaser 790

9–24

Copying printer description files

The User Software CD contains printer description files for
popular Windows applications. Pagemaker 5.0, 6.0,and 6.5 do not
support automatic installation of printer description files from the
Printer Control Panel. To make the Phaser 790 available in the
Print and Page Setup dialog boxes of this application, copy printer
description files to the appropriate location.

1. 

Insert the User Software CD in your CD-ROM drive. Open the

English\Prntdrvr

 folder.

2. 

Copy the printer description file to the appropriate location. For
PageMaker 5.0 or later, copy the EF3X1P10.ppd to one of the
following locations:

•

  For PageMaker 5.0--\ALDUS\USENGLSH\PPD4

•

  For PageMaker 6.0--\PM6\RSRC\USENGLSH\PPD4

•

  For PageMaker 6.5--\ PM65\RSRC \USENGLSH\PPD4

Installing the ICM profile

The Image Color Matching (ICM) profiles included in the Icm folder on
the User Software CD are for use with ColorWise ProTools. They can
also be used with applications that support ICC standards. For most
ICC aware applications, the files must be installed into a folder named
Color in the System folder. For use with ColorWise Pro Tools, the files
can be copied to a folder of your choice.

Содержание Phaser 790































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды