Xerox Nuvera 100, Руководство по обслуживанию

Страница: 29 / 304

General Information 1-29
Table 1-4. Configuration Page Settings
P a r a m e t e r Description Saved in
NVRAM
D e f a u l t Limits or alternate choices
Printer name The current name of the printer
as seen on a network yes Ii LINX
SIJ100 Any name defined by the customer
up to 32 characters in length.
Page count;
upper and lower
tray counts Total number of print jobs
processed through the image
processor. yes 0
Startup page
enabled Indicates if the printer prints a
startup page upon power-up. yes Yes No
Serial number Unique number representing the
printer serial number
yes
Product Ii LINX Solid
Inkjet 100
Printer ID A unique number for each
Ethernet-capable printer. yes Hardware-
dependent. Legal values have the form
xx:xx:xx:xx:xx:xx
PostScript version Firmware level of the
PostScript interpreter code.
N/A 3016.106
Firmware version Firmware levels of the main
board operating system code
version, printer engine’s
operating system code,
PostScript code, engine code,
and networking code.
N/A a.aa/b.bb/c.cc/d.dd, where a.aa is
the Sterling version of VxWorks,
b.bb is the PostScript version
number, c.cc is the engine code
version, and d.dd is the network
code firmware version
Flash Installed Yes
Installed RAM Total amount, type, and size of
RAM on the main board in each
DIMM slot. 64 Mbytes 64, 96,128
ROM fonts
available Number of fonts stored in the
printers ROM memory. 136
Sys/Job Start Indicates if the printer is to
execute a Sys/Start job file
found on an attached hard
drive at power-up yes yes no
Job Timeout Amount of time a job can take
to process. yes 0 seconds Any value denoted in seconds. 0
means unlimited amount of time