Xerox Nuvera 100, Руководство по обслуживанию

Страница: 171 / 304

Adjustments 4-27
Adjusting Look-Up Tables
The Look-Up Table (LUT) menu displays all of the LUT resources
currently available in the printer. The default LUT is indicated with a
check mark. The list of available LUTS is in alphabetic order. If there
are Contrast values within a family, the menu button is labeled
contrast. If there is not a contrast, the menu selection is limited to
OK. The standard family/contrast values is displayed in Table 4-1.
There may be up to 4 Custom LUT also stored in the Hidden Service
Menu.
Table 4-1. Look-Up Tables
Family Contrasts Available
Linear 1
soc-fixed 12
soc-variable 15
midtones 10
shoulder 5
toe 10
oem_1 12
oem_2 2
Custom Look-Up Tables
1. Cycle through up to 4 of the downloaded LUT. The tables
appear as a choice to save if the name is 16 characters or less,
the Transfer Table type is 3 or 4 and there are 6 coefficients or
less. Selecting the user tables and selecting OK saves it in
NVRAM.
NOTE: The message that the table has been saved is displayed for 2
seconds.
name of custom table
Saved as Table 1
2. If this table had been previously saved, you must confirm to
replace the table selection.
Replace Current Table 1
name of custom table? OK
If there have not been any custom tables downloaded to the printer,
when the menu button is pressed the front panel displays
No Custom Look-Up Table Are Available.