Xerox DocuPrint 4635, Руководство оператора

Страница: 95 / 344

SYSTEM CONTROL TASKS
Figure 4-11. Attention Light/Alarm window
2. Select the appropriate Enabled button to enable the:
• Steady Attention light
• Flashing Attention light
• Alarm
Select the appropriate Disabled button to disable the:
• Steady Attention light
• Flashing Attention light
• Alarm
3. Select the appropriate header button:
• Apply/Close. Apply your selection and close the window.
• Apply. Apply your selection.
• Close. Close the window.
Attention Light/Alarm task through
command line • To enable the Attention light, enter the following command:
ATTENTION LIGHT ENABLE [STEADY|FLASHING]
STEADY Enables only the steady mode of the Attention
light.
FLASHING Enables only the flashing mode of the
Attention light.
• To disable the Attention light, enter the following command:
ATTENTION LIGHT DISABLE [STEADY|FLASHING]
STEADY Disables the steady mode of the Attention
light.
FLASHING Disables the flashing mode of the Attention
light.
• To enable the alarm, enter the following command:
ATTENTION ALARM ENABLE {0-10}
0-10 Sets the tone volume for the alarm. 0 is softest, 10 is
loudest volume.
• To disable the alarm, enter the following command:
ATTENTION ALARM DISABLE
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE 4-11