Xerox DocuPrint 4635, Руководство оператора

Страница: 169 / 344

OFFLINE PRINTING TASKS
• The Saved Commands menu (directly beneath the
Saved Command field) lists start commands.
— To add commands to the list:
a. Enter the appropriate job information in the input
fields.
b. Enter a start command name (up to eight
characters in length) in the Saved Command field.
c. Select the Save header button.
— To start a job from the list:
a. Select that job's start command from the Saved
Commands menu. The job's information appears
in the input fields.
Note: You can also display job information for a
start command by entering the start command
name in the Saved Command field and selecting
the Show header button. The job's information
now appears in the input fields.
b. Select the Start header button to start the job.
— To delete a start command from the command library:
a. Highlight the saved start command.
b. Select the Delete header button from the header
auxiliary menu.
3. Select either:
• Start. Start the print job.
• Start/Close. Start the print job and close the window.
Start Job task through command line To start an offline print job, enter the following command:
START [[jde][,[jdl][,[S|M][,[copies]
[,[[REPORTS:r1,r2,...]
[,,TDn]| [,TDn]]| [DISC:file.ext
FORM=form.frm]]]]]]
START Specifies the command, to be followed by
any or all of the specifications as needed
(often abbreviated as STA).
jde The name or number of the job descriptor
entry, which may be up to six characters in
length.
jdl The name or number of the job descriptor
library which contains the jde used. The
name or number may be up to six
characters in length.
S Single report mode processes only one
report at a time. Use this mode when
changes must be made to the job
specification from one report to the next.
The system assumes multiple report mode if
you insert a comma instead of S or M.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE 7-31