Xerox DocuPrint 4635, Руководство оператора

Страница: 209 / 344

STATUS AND PRINT TASKS
2. Select either:
• Apply/Close. Apply your selection and close the window.
• Close. Close the window.
Note: You must still ensure that either transparency or regular
stock is loaded in the appropriate feeder trays.
Transparencies task through
command line • To cause printing on transparencies, enter the following
command:
TRANS YES
• To cancel printing on transparencies, enter the following
command:
TRANS NO
Notes:
• You must still ensure that either transparency or regular stock
is loaded in the appropriate feeder trays.
• Changes made through the command line are not reflected
in the Transparencies window.
Select units
Use this task to select the unit of measurement for the PC UI.
This selection determines whether measurements are displayed
and entered in the PC UI windows in inches or millimeters. The
selection of the Units window affects the Printer Status window,
the Tray Size window, and the Container Size window.
Select Units task
through windows 1. Select the “Units” option from the Printer Status window's
header auxiliary menu to open the Units window.
Figure 9-10. Units window
2. Select the appropriate radio button:
• Inches. Display and enter sizes in inches.
• Millimeters. Display and enter sizes in millimeters.
3. Select the appropriate header button:
• Apply/Close. Apply you selection and close the window.
• Close. Close the window.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE 9-19