Xerox DocuPrint 4635, Руководство оператора

Страница: 3 / 344

Laser safety
WARNING: Use of controls or adjustments, or performances
other than specified herein, may result in hazardous laser light
exposure. Mirrors and/or optical devices should not be used to
view or deflect the laser beam.
The 4635 Laser Printing System is certified to comply with laser
performance standards set by the U.S. Department of Health,
Education, and Welfare and by IEC 825 for non-U.S. markets as a
Class 1 laser product. This is a class of laser products that does
not emit hazardous radiation. This is possible only because the
laser beam is totally enclosed during all modes of customer
operation.
Ozone information
Note: This product produces ozone during normal operation.
The ozone produced is dependent on print volume and is
heavier than air. Providing the proper environmental parameters
as specified in the Xerox installation instructions will ensure that
concentration levels meet safe limits. If additional information
concerning ozone is needed, request Xerox publication
600P83222, “OZONE,” by calling 1-800-828-6571.
Operation safety
Your Xerox equipment and supplies have been designed and
tested to meet strict safety requirements. These include safety
agency examination and approval, and compliance to established
environmental standards. Attention to the following notes will
ensure the continued safe operation of your equipment.
• Always connect equipment to a properly grounded power
source receptacle. If in doubt, have the receptacle checked
by a qualified electrician.
WARNING: Improper connection of the equipment
grounding conductor can result in risk of electrical shock.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE iii