Xerox DocuPrint 4635, Руководство оператора

Страница: 262 / 344

MAINTENANCE TASKS
4. Remove the cleaning disk. Check off the usage on the label
and replace it in its protective envelope. Store it with the
bottle of solution in the cleaning kit box for future use. Do
not use the cleaning disk more than the number of times
you can make checks on the label.
Figure 11-26. Marking usage on the cleaning disk
You are again ready to insert a floppy disk for normal operation.
Using the custom transfer assist blade
The transfer assist blade in the 4635 LPS assures good print
quality for your jobs. A kit is available allowing you to customize
a transfer assist blade for use with non-standard paper size.
Note: Use the custom transfer assist blade on all 4635MX
systems running non-standard paper sizes to ensure acceptable
MICR line quality.
When not to use the custom transfer assist blade
You cannot use the custom transfer assist blade for print jobs
that use more than one paper size. In addition, the following
range of paper lengths cannot use the custom blade:
• In U.S. markets
— 11.1 to 11.4 inches/282 to 290 mm
— 11.8 to 12.1 inches/300 to 307 mm
— 13 to 13.5 inches/330 to 343 mm
• In non-U.S. markets
— 11.1 inches to 11.4 inches/282 to 290 mm
— 11.8 inches to 12.1 inches/300 to 307 mm
Note: With these paper sizes, transfer efficiency may be
reduced.
CAUTIONS:
• For the above paper sizes, the standard transfer assist blade
must be used.
• To avoid damage to the photoreceptor, you must perform
the Set Tray Size task explained in chapter 9, “Status and
print tasks.”
11-22 XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE