Xerox DocuPrint 4635, Руководство оператора

Страница: 117 / 344

JOB CONTROL TASKS
• Select Yes to clear the job queue and close the confirmation
window.
• Select No to close the confirmation window without clearing
the job queue.
Reset task through command line Enter the following command:
RESET
If the system is idle when the Reset command is entered, a
message displays informing you that the system has been reset
and is ready for another request. If the system is not idle, the
following messages appear in the Messages window of the PC UI
or the system controller display (non-U.S. markets only):
RESET WILL CLEAR THE JOB QUEUE. DO YOU WANT TO PROCEED?
(TYPE 'Y' FOR YES, OR 'N' FOR NO; ENTER = YES)
Press <Y> to clear the job queue; press <N> to cancel the
RESET command.
Align
Use this task to align the printer's laser image with the paper.
Note: Normal alignment on the LPS is exceptionally accurate and
very seldom, if ever, requires adjustment. If you need to adjust
the alignment for a specific form, it is very important to
remember to restore the alignment to the original specifications
when the job is completed. Failure to do so could result in lost
information when printing future jobs. (The normal alignment
setting of the 4635 LPS is 1,0.)
Align task through windows 1. Select “Align” from the Job Control menu to open the Align
window.
Figure 5-4. Align window
The Align window displays the current alignment.
The paper icons displayed underneath the Lines and Dots
fields show the direction the image moves on the paper if
you change the numeric value in the fields.
• ‘–‘ is the direction the image moves if you decrease the
number in the field.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE 5-5