Xerox DocuPrint 4635, Руководство оператора

Страница: 120 / 344

JOB CONTROL TASKS
Print Darkness
Use this task to make the printed image lighter or darker. The
setting ranges from 1 (the lightest) to 9 (the darkest). The
default value is 5.
Note: For MICR users, turn off MICR mode when adjusting the
DARKNESS settings.
Print Darkness task through windows 1. Select “Print Darkness” from the Job Control menu to open
the Print Darkness window.
Figure 5-6. Print Darkness window
The current value of image darkness is indicated by the
highlighted button.
2. To change the print darkness value, select the radio button
with the value you want to apply.
3. Select the appropriate header button:
• Apply/Close. Apply your selection and close the window.
• Apply. Apply your selection.
• Close. Close the window.
• Test. Print a sample with the new print darkness value
applied. If a job is currently printing, a page from the job
with the new value applied is delivered to the sample
tray. If a print job is not running, the test form, with the
new value applied, is delivered to the sample tray. (Refer
to figure 5-5.)
• Redisplay. Return the print darkness value to what it was
when you first opened the Print Darkness window.
Print Darkness task through
command line • To change the print darkness level, enter the following
command:
DARKNESS [level [,TEST]]]
level Print darkness level you want to apply.
TEST To receive a sample with the new darkness value
applied.
If a job is printing, a page with the new value applied is
delivered to the sample tray. If no job is printing, the test
form with the new value applied is delivered to the sample
tray. (Refer to figure 5-5.)
5-8 XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE