Xerox DocuPrint 4635, Руководство оператора

Страница: 211 / 344

STATUS AND PRINT TASKS
Lower trays and bins
Use this task to lower tray and bin elevators from the PC UI or
system controller terminal.
Lower Trays and Bins task
through windows In the printer mimic of the Printer Status window, select the
down arrow on the tray or bin you want to lower.
• If the tray or bin is currently in use and an alternative tray or
bin is available, feeding or stacking switches to the other tray
or bin.
• If the tray or bin is currently in use and an alternative tray or
bin is not available, printing stops.
Lower Trays and Bins task
through command line Enter the following command:
UNLOAD {n|a}
n The feeder tray.
a The stacker bin.
Set tray size
Use this task to tell the printer that custom size paper is loaded
in a feeder tray.
Note: You can also perform this task from the printer control
console. To do so, follow this procedure:
1. Touch the Guarded Tools icon.
2. Select the Tray Size button.
3. Follow the screen instructions to select feeder tray sizes.
CAUTION: If you use non-standard size paper for a print job
without performing the Set Tray Size task, you may cause damage
to the LPS photoreceptor belt. If you are using a custom transfer
assist blade, follow the instructions for setting tray size in the
“Using the custom transfer assist blade” section of chapter 11,
“Maintenance tasks.”
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE 9-21