wtw TresCon UNO A111, Руководство по эксплуатации

Страница: 51 / 208

TresCon UNO Installation
3 - 33 ba43134e08 05/2017
Fig. 3-28 Connecting the permeate feed and outlet tubes
Attention
The drain must be pressure free!
Note
The back connection piece of the overflow vessel is for aeration. It must
not be closed.
3 Connect each of the two overflow vessels to the following con-
nectors (see Fig. 3-28):
– Connect the sample or permeate tubes (black tube, inner
diameter = 6 mm) to the front connection piece of the over-
flow vessel.
– Connect the sample overflow (center connection piece) to
the drain set.
Tube: Inner diameter = 6 mm, black.
4 Lead the permeate tube of the analyzer module (black tube,
inner diameter = 1.5 mm) through the left-hand drilling in the
bottom of the TresCon UNO enclosure and connect it to the
center fitting of the three/two way valve on the permeate
switch.
to measuring
module
O
I
Pumpschlauch Standard/Probe
blau / blau / blau
Pumpschlauch Reagenz
orange / gelb / orange
Pump Tube Standard/Sample
blue / blue / blue
Pump Tube Reagent
orange / yellow / orange
TresCon PO4-P
Reinigungslösung
Cleaning Solution H O dest.
H O dest. 2
2
Standard B
Standard B Reagenz
Reagent
Ablauf
blau
blue
V3
V2 V4
Thermoblock
Probe
Sample
V1
gelb
yellow orange
orange grün
green
blau
blue rot
red grün
green
P1 P2
P3
sample
(permeate)
sample 2
sample 1
drain
Probe 1
Probe 2