wtw TresCon UNO A111, Руководство по эксплуатации

Страница: 134 / 208

Operation TresCon UNO
5 - 78 ba43134e08 05/2017
5.7.2 Record printout
You can print the following records:

Data record (also by interval)
Measured values are printed in the intervals that are selected.

Calibration record
After AutoCal, the calibration record is printed.

Messages
In case of the following events, messages are generated and dis-
played and also printed if the
Record printout function is activated:
– Lack of sample,
– Container empty,
– Fill container
(if the fluid level in the container falls below 10 cm),
– Malfunction
(if a malfunction of any type occurs).
Activating
record printout
To do so, first select the interface for the output of the data. This is fol-
lowed by the input of the other parameters.
Note
Only the Messages record type is available for the controller.
Parameter Values
Interface RS232, RS485
Printout On/off
Output of measured values 1, 2, 3, ... 120 min (printing interval),
Off
Calibration record On/off
Messages On/off
1 Measuring mode
Call up the General Parameters menu: Simultaneously press
the keys,
4
and
2
.
2 Select the Record printout menu item with
68
and con-
firm with
3
. The prompt Presentation of data/Change
appears .
3 Select the Change mode with
68
and confirm with
3
.