wtw TresCon UNO A111, Руководство по эксплуатации

Страница: 31 / 208

TresCon UNO Installation
3 - 13 ba43134e08 05/2017
Fig. 3-12 Leading cables to the terminal strip (viewing the analyzer from the front)
Warning
If the safety cover was removed or improperly mounted, there is a dan-
ger of life threatening electric shock when performing maintenance
activities on the analyzer module. Operation without a properly
mounted safety cover is not allowed.
5 Lead the cable(s) to the terminal strip (Fig. 3-12).
When doing so, separate voltages subject to the danger of
physical contact from Safety Extra Low Voltage SELV:
– Insert all voltages subject to the danger of physical contact
through one of the two cable glands on the left side (viewed
from the front) and lead them to the terminal strip through
the cable duct on the safety separating plate.
– Insert all voltages that are not greater than Safety Extra Low
Voltage SELV through one of the two cable glands on the
right side and lead them to the terminal strip along the lateral
wall of the mounting frame. To do so, fix the cables with
cable ties at the three adhesive bases prepared.
6 Attach the connecting wires to the connections of the terminal
strip. Observe the function-specific details given in section
3.5.3 to section 3.5.9 for this.
7 Fix the safety cover (see Fig. 3-11) with the screws.
Safety
separating
plate
Cable
glands
Cable tie with
adhesive base (3x)
O
I
Cable duct