wtw inoLab 740, Руководство по эксплуатации

Страница: 218 / 274

Data output
218
12.2 Outputting data to the integrated printer
12.2.1 General information
The integrated printer is operated via the
o
key (switched
on/off) and the
f
key (manual line feed) on the terminal.
The operating status of the printer is indicated by the print
LED on the terminal.
l Green LED: printer ready for operation
l Red LED: printer off or malfunction
To print on the integrated printer, the following conditions
must be fulfilled:
l The integrated printer must be switched on and ready for
operation (
print LED lights up green, see section 12.2.2),
l The data output is set to the integrated printer (see
section 12.2.3),
l A manual or automatic print job must have been given
(section 12.2.4),
Note
For troublefree operation of the integrated printer, we
recommend disconnecting any other devices from the
RS232/REC interface.
It is not possible to operate the integrated printer and
external devices (printer, PC, or analog recorder) on the
RS232/REC interface at the same time.