wtw inoLab 740, Руководство по эксплуатации

Страница: 161 / 274

BOD
161
Note
In the case of an end measurement with barcode reader,
any order of the measurement of blank value solutions and
7 Select a sample in the name field with
82
.
The status field shows the status of the sample:
: incubation period still running
: performing end measurement
: end measurement already performed.
: incubation period exceeded
8 Check the data on the display.
l If the data is correct: Continue with step 11.
l
To change the data: Continue with step 9.
9 Swap between the selection fields with [Next] .
10 Select Yes or No in the KnownDil.Water (use known
dilution water) field with
82
.
l Skip the end measurement of the blank value
solutions with
Yes . The end measurements of the
known blank value solutions are used for
calculating the BOD.
l Use No to carry out the end measurements also for
the blank value solutions.
11 Begin the end measurement with [Start] .
l
If KnownDil.Water Yes was selected, continue with
step 19.
l If KnownDil.Water No was selected, the End
measurement window for the first blank value
solution opens.